Hi, I am very sorry for the trouble you have. I am afaird that I may not offter you an English menu. Basically, first solider all the leds, the 64 leds in each layer share the same anode, while the 8 leds in each column shared the same cathode. So there are 8 anodes and 64 cathodes on the board.About programming, if you are using the Xuping's version, plug the USB cable, and you would find a serial port on your PC. Then you may send 2 bytes, like 0xf1 0 00 , which refers to turn off all leds, 0xf1 0xff means turns all leds on. There are other 2 commands, 0xf1, 0xf2.There is a blog about 3D8 driven by arduino. There is a sample code there. Wish it would make more sense to you.